8600 West Tangerine Road
Marana, AZ 85658
Monday – Friday: 8:00am -4:30pm
The name or names of the person(s) that will be responsible for the electric bill.
Physical address, mailing address (if different) and home phone, cell phone and valid email address. Employer, previous address and length of lease (if applicable).
Trico may ask for a social security number, driver’s license number or date of birth to confirm identity of the responsible party and for security purposes.
Trico will require either a letter of credit from your existing electric provider showing a minimum of 24 months of consecutive service and no more than two delinquent/late notices within the most recent 12 months. If your letter of credit does not meet the criteria, you will be required to pay an advance deposit to equal an average two month bill for the location you are moving into or a minimum deposit of $250.
A minimum two day notice to schedule your order is required.
Appointments are not available, work is completed according the individual Technician’s schedule and work load.
Access to the meter must be provided. Locked gates or animals that prevent the Technician from accessing the meter will result in a return trip and additional $50 field trip fee.
Yes, a $50 Establishment Fee is billed on the first month’s bill.
Deposits must be paid prior to connecting or transferring service. Payment is required in full. The deposit will be refunded to your Trico account after 12 months of history and no more than two delinquent notices within the past 12 months. If your credit history does not meet the requirement to refund your deposit, it will continue to stay on your account until it can be refunded and/or applied to your final bill.
Accounts must have a minimum of 12 months existing service in order to have an extension.
Arrangements are limited to two times per year.
Broken payment arrangements will suspend additional extensions for 12 months.
Arrangements must be made prior to the termination date on your bill.
You’ll save money anytime you can increase the temperature on your thermostat and cause the unit not to run. The old myth that says you will spend more energy bringing the temperature back down than you would have spent just leaving the thermostat alone is just that, a myth.
The Department of Energy (DOE) recommends that you set the thermostat no lower than 78⚬ F when you are home and need cooling. Set your thermostat at as high a temperature as comfortably possible. The smaller the difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be since the unit will not need to run as frequently. Avoid setting your thermostat at a colder setting than normal when you turn on your air conditioner. It will not cool your home any faster and could result in higher electric bills. Assuming that your air conditioner is properly sized and operates on a 20-degree differential (the difference between the temperature inside and outside the home), an AC system would be operating continually if the thermostat was set at 78⚬ F when the outside temperature is at 98⚬ F or more. During summer months in Arizona, we often experience multiple days with temperatures at 100⚬ F or higher. If you’re not at home during the day, set your thermostat higher to stay within the 20-degree differential. Consider a programmable thermostat so that you control how often and when the air conditioner operates.
The more frequently your AC cycles on and off, the more energy you use. The goal is to keep the thermostat set at a temperature that is comfortable for you, but high enough that the system doesn’t cycle on and off too frequently. If the temperatures outside continue to increase, but you are not also increasing your thermostat, and the temperature differential between the outside and inside temperatures become larger, the AC unit will cycle on more frequently and result in higher energy usage and larger electric bills. Also note that if you have a second refrigerator or freezer that is in unconditioned air (porch, garage, etc.), those units will also work harder to maintain the internal temperature while the outside temperatures continue to rise, resulting in more consumption and higher energy costs. While you might not do anything different from day-to-day or week-to-week, the outside temperatures do play a big part in your energy consumption.
Never having to change your filters is unusual, especially with Arizona’s fine dust. If you’re using very inexpensive filters, they may be too loose to catch any fine dust. This allows the dust to accumulate on the unit’s evaporator coil, which could cause problems later. You might consider the 1-inch pleated filter. A more expensive filter might be too restrictive and could cause problems for your AC unit.
Extreme heat conditions result in an AC unit that runs more frequently in an attempt to bring down the interior temperatures of your home. The air filters inside the unit filter more dust and debris, clogging more quickly than normal. The fan on the exterior unit accumulates debris faster as it constantly revolves. The DOE recommends that you replace the inside filter at least once a month.
Air conditioners perform two basic functions: heat removal and moisture removal. Even in Arizona, we have a monsoon season with higher-than-normal humidity levels. The lower the humidity, the more comfortable you will feel at a given temperature. As warm indoor air is drawn up through the filter, it passes over a very cold coil whereby the heat and moisture are removed. If you’ve ever noticed a PVC pipe running off your roof that drips water, that is the moisture removed from your home. When the humidity is high, it makes sense that the AC system is working harder to keep your home cool. If you have an older, inefficient or wrong-sized system, it may not handle the job and you may end up feeling warmer than it actually is because the air is holding extra moisture that isn’t properly removed. If your AC system is working longer and harder, this can add wear to the unit and can result in higher utility bills.
Because heat rises and extra heat gain exists on the second floor, the upper level will likely require more cooling than the lower level. To maintain a constant temperature in your home, set each thermostat at the same temperature. However, if you want to reduce energy costs, you can maintain a comfortable temperature on the floor you are occupying. If you’re not using the upstairs, set the second-floor thermostat a couple of degrees higher. Reverse the process at night when you’re upstairs.
Sign up for SmartHub. This application provides convenient account access to Usage Explorer, giving you a detailed look at your past and current usage, all in one place. You can view your usage and weather trends by month, or if available, by day. Along with daily consumption, you can see the high, low and average temperatures with an option to view the daily cost. Many TRICO members are utilizing this tool in an effort to reduce their power bills.